3.5.4.7
proxy
Note
This command is only available with a KEY-PLUG.
Description
With this command, you specify that the connection to the defined SINEMA RC Server is
established via a proxy server.
Requirement
● The proxy server is configured.
● You are in the SINEMARC configuration mode.
The command prompt is as follows:
cli(config-sinemarc)#
Syntax
Call up the command with the following parameters:
proxy <string(128)>
The parameter has the following meaning:
Parameter
string
Result
The proxy server via which the connection is established is configured.
Further notes
You remove the proxy server with the
You display the available proxy server names with the
You display this setting and other information with the
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Description
Proxy server name
no proxy
Functions specific to SCALANCE
Range of values / note
Specify the proxy server name.
Maximum of 128 characters
command.
srv show-names
command.
show sinemarc
3.5 SINEMA RC
command.
117