Preconditions For Operation - Siemens SINAUT MD741-1 System Manual

Setup
2.2

Preconditions for operation

In order to operate the SINAUT MD741-1, the following information must be on
hand and the following preconditions must be fulfilled:
Antenna
An antenna, adapted to the frequency bands of the GSM network operator you
have chosen: 850 MHz, 900 MHz, 1800 MHz or 1900 MHz. Use only antennas
from the accessories for the SINAUT MD741-1.
See Chapter 2.6.
Power supply
A power supply with a voltage between 12 VDC and 30 VDC that can provide
sufficient current.
See Chapter 2.6.
SIM card
A SIM card from the chosen GSM network operator.
PIN
The PIN for the SIM card.
EGPRS / GPRS activation
The SIM card must be activated by your GSM network operator for the services
EGPRS or GPRS.
The EGPRS / GPRS access data must be known:
Access Point Name (APN)
●
User name
●
Password
●
CSD 9600 bit/s activation
The SIM card must be activated by your GSM network operator for the CSD
service if you wish to use remote configuration via a dial-in data connection, see
Chapter 8.3.
16
SINAUT MD741-1
C79000- G8976-C212