Ipsec Vpn - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

● Metric
Shows the metric of the route. The higher the value, the longer packets require to their
destination.
● Routing Protocol
Shows the routing protocol from which the entry in the routing table originates. The
following entries are possible:
– Connected: Connected routes
– Static: Static routes
4.3.9

IPsec VPN

The WBM page shows the status of the activated VPN connections.
Description
This table contains the following columns:
● Name
Shows the name of the VPN connection.
● Local Host
Shows the IP address of the device.
● Local DN
Shows the Distinguished Name (DN) of the device that was signaled to the remote station
during connection establishment. The entry is adopted from the "Local ID" box, the device
certificate or the IP address of the device.
● Local Subnet
Shows the local subnet.
● Remote Host
Shows the IP address or the hostname of the remote device.
● Remote DN
Shows the Distinguished Name (DN) signaled by the remote device during connection
establishment.
● Remote Subnet
Shows the remote subnet.
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02
Configuring with Web Based Management
4.3 "Information" menu
59