Configuring Ct1 Channels Down To Ds Interfaces - Juniper ACX1000 Configuration Manual

Copyright © 2017, Juniper Networks, Inc.
For example:
[edit interfaces coc3-1/0/0]
user@host# up
Configure the channelized OC1 interface and the sublevel interface partition index,
4.
and set the interface type as
[edit interfaces]
user@host# set coc1-1/0/0:1 partition partition-number interface-type ct1
For example:
[edit interfaces]
user@host# set coc1-1/0/0:1 partition 1 interface-type ct1
To verify the configuration, use the
level.
[edit interfaces]
user@host# show
coc3-1/0/0 {
partition 1 oc-slice 1 interface-type coc1;
}
coc1-1/0/0:1 {
partition 1 interface-type ct1;
}

Configuring CT1 Channels Down to DS Interfaces

To configure CT1 channels down to a DS interface, include the
[edit interfaces ct1-mpc-slot/mic-slot/port-number:channel:channel]
In configuration mode, go to the
1.
ct1-mpc-slot/mic-slot/port-number:channel:channel]
[edit]
user@host# edit interfaces ct1-mpc-slot/mic-slot/port-number:channel:channel
For example:
[edit]
user@host# edit interfaces ct1-1/0/0:1:1
Configure the partition, the time slots, and the interface type.
2.
[edit interfaces ct1-mpc-slot/mic-slot/port-number:channel:channel]
user@host# set partition partition-number timeslots timeslots interface-type ds
For example:
[edit interfaces ct1-1/0/0:1:1]
user@host# set partition 1 timeslots 1-4 interface-type ds
Chapter 8: Configuring CESoPSN Support on Interfaces
ct1 .
show command at the
[edit interfaces
hierarchy level.
[edit interfaces] hierarchy
statement at the
partition
hierarchy level:
209