Ricoh M022 Service Manual page 550

5. System Maintenance
8 066
8 067
8 06x 1 Sort
8 06x 2 Stack
5
8 06x 3 Staple
8 06x 4 Booklet
8 06x 5 Z-Fold
8 06x 6 Punch
8 06x 7 Other
8 06x 8 Inside-Fold
8 06x 9 Three-IN-Fold
8 06x 10 Three-OUT-Fold
8 06x 11 Four-Fold
8 06x 12 KANNON-Fold
8 06x 13 Perfect-Bind
8 06x 14 Ring-Bind
8 071
548
CÓPIA NÃO CONTROLADA
L:FIN Jobs
These SPs total finishing methods for jobs output from within the document server mode
screen at the operation panel. The finishing method is specified from the print window
within document server mode.
O:FIN Jobs
These SPs total finishing methods for jobs executed by an external application, over the
network. The finishing method is specified by the application.
Number of jobs started in Sort mode. When a stored copy job
is set for Sort and then stored on the document server, the L:
counter increments. (See SP8 066 1)
Number of jobs started out of Sort mode.
Number of jobs started in Staple mode.
Number of jobs started in Booklet mode. If the machine is in
staple mode, the Staple counter also increments.
Number of jobs started In any mode other than the Booklet
mode and set for folding (Z-fold).
Number of jobs started in Punch mode. When Punch is set for
a print job, the P: counter increments. (See SP8 064 6.)
Reserved. Not used.
Not used
Not used
Not used
Not used
Not used
Not used
Not used
T:Jobs/PGS
These SPs count the number of jobs broken down by the number of pages in the job,
regardless of which application was used.
CÓPIA NÃO CONTROLADA
*CTL [0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]