Ricoh M022 Service Manual page 96

Hide thumbs Also See for M022:

Table of Contents

2. Installation

5. Install the key counter interface board [A] on the four studs.

6. Connect the harness [B] to the key counter interface board [A].

7. Connect the harness from the counter device to CN4 on the key counter interface board.

8. Route the harness.

• Remove the cover [A], and route the harness as shown above.

9. Reassemble the machine.

• Remove the optional counter interface unit when opening or removing the controller box.

CÓPIA NÃO CONTROLADA

Chapters

Table of Contents

M024 M026 M028