Ricoh M022 Service Manual page 799

Hide thumbs Also See for M022:

Table of Contents

[LD Initial Power Adjust]

Adjusts the LD initial power. These SPs must be input only when a new laser unit is installed.

[LD Power Adjust] DFU

(Process Speed, Color)

Adjusts the LD power of each color for each process speed.

Each LD power setting is decided by process control.

Low: 85 mm/s, High: 260 mm/s, Middle: 182 mm/s

CÓPIA NÃO CONTROLADA

CÓPIA NÃO CONTROLADA

[0 to 9.9 / 2 / 0.1 mm/step]

[60 to 140 / 100 / 0.1 %/step]

System SP2-xxx

Chapters

Table of Contents

M024 M026 M028