Ricoh M022 Service Manual page 920

3. Appendix: SP Mode Tables
Pattern Caluculation
005
Method
3043 [TD Adjustment Mode]
Repeat Number: Power ON
3
Specifies the maximum number of repeats of the toner density adjustment at power on.
0: Disabled, 1 to 3: Repeat number,
001
4: Repeat three times (No consumption mode)
5: Repeat three times (Toner is supplied only when the toner density is too low, and toner is
consumed only when the toner density is too dark.)
6 to 9: Disabled
Repeat Number: Initialization
Specifies the maximum number of repeats of the toner density adjustment at the developer
initialization.
0: Disabled, 1 to 3: Repeat number,
002
4: Repeat three times (No consumption mode)
5: Repeat three times (Toner is supplied only when the toner density is too low, and toner is
consumed only when the toner density is too dark.)
6 to 9: Disabled
Repeat Number: Non-use
Specifies the maximum number of repeats of the toner density adjustment in stand by mode.
0: Disabled, 1 to 3: Repeat number,
003
4: Repeat three times (No consumption mode)
5: Repeat three times (Toner is supplied only when the toner density is too low, and toner is
consumed only when the toner density is too dark.)
6 to 9: Disabled
174
CÓPIA NÃO CONTROLADA
[0 to 2 / 0 / 1/step]
0: FIXED
*ENG
1: INITIALIZED
2: CALCULATED
*ENG
*ENG
*ENG
CÓPIA NÃO CONTROLADA
[0 to 9 / 4 / 1 time/step]
[0 to 9 / 3 / 1 time/step]
[0 to 9 / 0 / 1 time/step]