Ricoh M022 Service Manual page 854

3. Appendix: SP Mode Tables
[Thick1: Bias]
2501
Adjusts the DC voltage of the discharge plate for thick 1 paper.
Middle: 182 mm/sec, Low: 85 mm/sec
001 Separation DC: Middle Spd: 1st
002 Separation DC: Middle Spd: 2nd
003 Separation DC: Low Spd: 1st
3
004 Separation DC: Low Spd: 2nd
[Thick 1: Bias: BW]
2502
Adjusts the current for the paper transfer roller for thick 1 paper in black-and-white mode.
Middle: 182 mm/sec, Low: 85 mm/sec
001 Paper Transfer: Middle Spd: 1st
002 Paper Transfer: Middle Spd: 2nd
003 Paper Transfer: Low Spd: 1st
004 Paper Transfer: Low Spd: 2nd
[Thick 1: Bias: FC]
2507
Adjusts the current for the paper transfer roller for thick 1 paper in full color mode.
Middle: 182 mm/sec, Low: 85 mm/sec
001 Paper Transfer: Middle Spd: 1st
002 Paper Transfer: Middle Spd: 2nd
003 Paper Transfer: Low Spd: 1st
004 Paper Transfer: Low Spd: 2nd
[Thick1-T:Size Correct:BW] DFU
Adjusts the size correction coefficient for the paper transfer roller current for each paper size.
2511
SP2502 and SP2507 are multiplied by these SP values.
Middle: 182 mm/sec, Low: 85 mm/sec
108
CÓPIA NÃO CONTROLADA
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
CÓPIA NÃO CONTROLADA
*ENG
*ENG
[0 to 6000 / 2000 / 10 -V /
step]
*ENG
*ENG
[0 to 230 / 15 / 1 – A /step]
Not used
[0 to 230 / 9 / 1 – A /step]
[0 to 230 / 12 / 1 – A /step]
[0 to 230 / 24 / 1 – A /step]
Not used
[0 to 230 / 12 / 1 – A /step]
[0 to 230 / 18 / 1 – A /step]