Ricoh M022 Service Manual page 852

3. Appendix: SP Mode Tables
015 Paper Transfer: Low: 1: S4
[Thin: L-Edge Correction] DFU
Thin Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
mode. SP2453 and SP2457 are multiplied by these SP values.
2471
3
Standard: 260 mm/sec, Low: 85 mm/sec
• The paper leading edge area can be adjusted with SP2472.
001 Paper Transfer: Standard: 1st
003 Paper Transfer: Low: 1st
005 Separation DC: Standard: 1st
007 Separation DC: Low: 1st
[Thin: Switch Timing: L-Edge] DFU
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
2472
paper leading edge between the erase margin area and the image area.
Standard: 260 mm/sec, Low: 85 mm/sec
001 Paper Transfer: Standard: 1st
003 Paper Transfer: Low: 1st
005 Separation DC: Standard: 1st
007 Separation DC: Low: 1st
106
CÓPIA NÃO CONTROLADA
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
CÓPIA NÃO CONTROLADA
[1 to 100 / 26 / 1 /step]
139 mm > S4 (Paper width)
[0 to 995 / 100 / 5%/step]
[0 to 995 / 200 / 5%/step]
[0 to 50 / 0 / 2 mm/step]
[0 to 50 / 30 / 2 mm/step]