Ricoh M022 Service Manual page 1003

011 NCS
012 R-Fax
014 Clear DCS Setting
015 Clear UCS Setting
016 MIRS Setting
017 CCS
018 SRM Memory Clr
019 LCS
020 Web Uapli
021 ECS
5803 [Input Check]
5804 [Output Check]
[Anti-Condensation Heater]
0: Default setting. The heater is on when the main switch is off or when the machine is in
5805
energy saver mode.
1: The heater is always on.
001 0:OFF/ 1:ON
5806 [RFID Cont. Reading] DFU
001 Times
002 NOT 0
003 RET.
CÓPIA NÃO CONTROLADA
All setting of Network Setup (User Menu)
(NCS: Network Control Service)
Initializes the job login ID, SmartDeviceMonitor for
Admin, job history, and local storage file numbers.
Initializes the DCS (Delivery Control Service) settings.
Initializes the UCS (User Information Control Service)
settings.
Initializes the MIRS (Machine Information Report Service)
settings.
Initializes the CCS (Certification and Charge-control
Service) settings.
Initializes the SRM (System Resource Manager) settings.
Initializes the LCS settings.
Initializes the web user application settings.
Initializes the ECS settings.
See "Input Check Table" in this section.
See "Output Check Table" in this section.
*ENG
*ENG
*ENG [0 to 65535 / 0 / 1 time/step ]
*ENG
CÓPIA NÃO CONTROLADA
[0 or 1/ 0 / -]
System SP5-xxx
3
257