Ricoh M022 Service Manual page 1024

3. Appendix: SP Mode Tables
126 Reso: Fax (Mono)
Selects the resolution for BW fax mode. This is basically adjusted by the remote system.
0: 600dpi/ 1: 400dpi/ 2: 300dpi/ 3: 200dpi/ 4: 150dpi/ 5: 100dpi/ 6: 75dpi
Reso: Scan (Color)
3
127
Selects the resolution for color scanning mode. This is basically adjusted by the remote
system.
0: 600dpi/ 1: 400dpi/ 2: 300dpi/ 3: 200dpi/ 4: 150dpi/ 5: 100dpi/ 6: 75dpi
Reso: Scan (Mono)
128
Selects the resolution for BW scanning mode. This is basically adjusted by the remote
system.
0: 600dpi/ 1: 400dpi/ 2: 300dpi/ 3: 200dpi/ 4: 150dpi/ 5: 100dpi/ 6: 75dpi
All Addr Info Switch
Switch this SP off if the system is performing slowly due to a large number of resources in
141
use. If this SP is switched off, only 2000 documents can be queued for sending to the
Capture Server. (See SP5836-142 below.)
0: Off, 1: On
Stand-by Doc Max
Number
142
This SP sets the maximum number of documents to be held on stand-by before they are
sent to the Capture Server. However, the maximum number (10,000) cannot be set unless
SP5386-141 has been disabled (switched off).
5840 [IEEE 802.11]
278
CÓPIA NÃO CONTROLADA
This is basically adjusted by the remote system.
[0 to 6 / 3 / 1/step]
This is basically adjusted by the remote system.
[0 to 6 / 4 / 1/step]
This is basically adjusted by the remote system.
[0 to 6 / 3 / 1/step]
[0 to 1 / 1 /1]
[10 to 10000 / 2000 / 1]
CÓPIA NÃO CONTROLADA