Ricoh M022 Service Manual page 693

No. Type
HDD Encryption unit error 2
A serious error occurs when the HDD data is encrypted to update an encryption key
with the HDD encryption unit.
[8]
CTL
859
C
[9]
[10]
No. Type
HDD: Initialization error
The controller detects that the hard disk fails.
CTL
• HDD not initialized
860
B
• Defective HDD
1. Reformat the HDD.
2. Replace the HDD.
CÓPIA NÃO CONTROLADA
Details (Symptom, Possible Cause, Troubleshooting Procedures)
HDD check error:
The HDD is not correctly installed.
• No HDD installed
• Unformatted HDD
• The encryption key on the controller is different from the one on the
HDD
1. Install the HDD correctly.
2. Initialize the HDD.
Power failure during the data encryption:
The data encryption (NVRAM and HDD) has not been completed.
• Power failure during the data encryption
1. Initialize the HDD.
Data read/write error:
The DMAC error is detected twice or more.
• Same as SC863
Details (Symptom, Possible Cause, Troubleshooting Procedures)
CÓPIA NÃO CONTROLADA
SC Tables
6
691