Ricoh M022 Service Manual page 508

5. System Maintenance
Selects the authentication method for SMPT.
Bit switch:
• Bit 0: LOGIN
• Bit 1: PLAIN
• Bit 2: CRAM MD5
• Bit 3: DIGEST MD5
• Bit 4 to 7: Not used
• This SP is activated only when SMTP authorization is enabled by UP mode.
5
S/MIME: MIME Header
026
Setting
5870 [Common Key Info Writing]
001 Writing
Initialize
Initializes the set certification.
When the GW controller board is replaced with a new one for repair, you must execute the
003
"Initiralize (-003)" and "Writing (-001)" just after the new board replacement.
NOTE: Turn off and on the main power switch after the "Initiralize (-003)" and "Writing
(-001)" have been done.
5873 [SD Card Appli Move]
001 Move Exec
002 Undo Exec
506
CÓPIA NÃO CONTROLADA
-
*CTL
*CTL
This SP copies the application programs from the original SD card in
SD card slot 2 to an SD card in SD card slot 1.
This SP copies back the application programs from an SD card in SD
Card Slot 2 to the original SD card in SD card slot 1. Use this menu
when you have mistakenly copied some programs by using "Move
Exec" (SP5873-1).
CÓPIA NÃO CONTROLADA
Selects the MIME header type of an E-mail sent
by S/MIME.
[0 to 2 / 0 / 1]
0: Microsoft Outlook Express standard
1: Internet Draft standard
2: RFC standard
Rewrites the common certification used for the
@Remote.
-