Ricoh M022 Service Manual page 797

2015 [Charge AC Adj: Result]
001 Bk
002 C
003 M
004 Y
[Color Regist Adust]
These values are the parameters for the automatic line position adjustment and are adjusted
2101
at the factory. However, you must input a value for SP2101-001 after replacing the laser
unit. For details, see "Laser Unit" in the "Replacement and Adjustment" section. The value
should be provided with the new laser unit.
001 Bk: Main Scan: Dot
002 C Main Scan: Dot
003 M Main Scan: Dot
004 Y Main Scan: Dot
005 Bk: Sub Scan: Line
006 C: Sub Scan: Line
007 M: Sub Scan: Line
008 Y: Sub Scan: Line
[Magnification Adjust] DFU
2102
These values are the parameters for the automatic line position adjustment and are adjusted
at the factory. These SPs must be input only when a new laser unit is installed.
CÓPIA NÃO CONTROLADA
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
CÓPIA NÃO CONTROLADA
[0 to 9 / 0 / 1 /step]
[–511 to 511 / 0 / 1 dot/step]
[–800 to 800 / 0 / 1 line/step]
System SP2-xxx
3
51