Ricoh M022 Service Manual page 63

When reinstalling HDD Encryption Unit:
Before You Begin the Procedure
1. Make sure that the following settings are not at the factory default settings:
• Supervisor login password
• Administrator login name
• Administrator login password
• These settings must be set up by the customer before the HDD Encryption unit can be installed.
2. Confirm that "Admin. Authentication" is on:
[User Tools] > "System Settings"> "Administrator Tools"> "Administrator Authentication
Management"> "Admin. Authentication"> "On"
If this setting is "Off", tell the customer that this setting must be "On" before you can do the installation
procedure.
3. Confirm that "Administrator Tools" is selected and enabled:
CÓPIA NÃO CONTROLADA
This icon is lit when there is temporary data to be overwritten,
Dirty
and blinks during overwritting
This icon is lit when there is no temporary data to be
Clear
overwritten.
CÓPIA NÃO CONTROLADA
Copier Installation
2
61