Ricoh M022 Service Manual page 621

Module mismatch - Module on SD
35
card is not for this machine
Cannot write module - Cause
36
other than E34, E35
40 Engine module download failed
Operation panel module
42
download failed
Stamp data module download
43
failed
Controller module download
44
failed
Electronic confirmation check
50
failed
CÓPIA NÃO CONTROLADA
SD update data is incorrect. The data on the SD card is
for another machine. Acquire correct update data then
install again.
SD update data is incorrect. The data on the SD card is
for another machine. Acquire correct update data then
install again.
Replace the update data for the module on the SD card
and try again, or replace the BCU board.
Replace the update data for the module on the SD card
and try again, or replace the LCDC.
Replace the update data for the module on the SD card
and try again, or replace the hard disks.
Replace the update data for the module on the SD card
and tray again, or replace controller board.
SD update data is incorrect. The data on the SD card is
for another machine. Acquire correct update data then
install again.
CÓPIA NÃO CONTROLADA
Firmware Update
5
619