Ricoh M022 Service Manual page 846

3. Appendix: SP Mode Tables
[Plain2: LE Correct] DFU
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
mode. SP2440 and SP2441 are multiplied by these SP values.
2446
Standard: 260 mm/sec, Low: 85mm/sec
• The paper leading edge area can be adjusted with SP2447.
001 Paper Transfer: Standard: 1
3
002 Paper Transfer: Standard: 2
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
005 Separation DC: Standard: 1st
006 Separation DC: Standard: 2nd
007 Separation DC: Low: 1st
008 Separation DC: Low: 2nd
[Plain2: SW Timing: LE] DFU
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
2447
paper leading edge between the erase margin area and the image area.
Standard: 260 mm/sec, Low: 85mm/sec
001 Paper Transfer: Standard: 1st
002 Paper Transfer: Standard: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
005 Separation DC: Standard: 1st
006 Separation DC: Standard: 2nd
007 Separation DC: Low: 1st
008 Separation DC: Low: 2nd
100
CÓPIA NÃO CONTROLADA
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
CÓPIA NÃO CONTROLADA
[0 to 995 / 100 / 5 %/step]
[0 to 50 / 0 / 2 mm/step]