Ricoh M022 Service Manual page 487

The certification has been stored, and the GW URL is being notified of the successful
15
completion of this event.
The storing of the certification has failed, and the GW URL is being notified of the
16
failure of this event.
The certification update request has been received from the GW URL, the GW URL
17 was notified of the results of the update after it was completed, but a certification
error has been received, and the rescue certification is being recorded.
The rescue certification of No. 17 has been recorded, and the GW URL is being
18
notified of the failure of the certification update.
CERT: Error
068
Displays a number code that describes the reason for the request for update of the
certification.
0 Normal. There is no request for certification update in progress.
1 Request for certification update in progress. The current certification has expired.
2 An SSL error notification has been issued. Issued after the certification has expired.
3 Notification of shift from a common authentication to an individual certification.
4 Notification of a common certification without ID2.
5 Notification that no certification was issued.
6 Notification that GW URL does not exist.
069 CERT: Up ID
083 Firmware Up Status
5821 [Remote Service Address]
002 RCG IP Address
[NV-RAM Data Upload]
Uploads the UP and SP mode data (except for counters and the serial number) from the
5824
NVRAM to an SD card. For details, see the "NVRAM Data Upload/Download" in the
"System Maintenance Reference" of the Field Service Manual.
CÓPIA NÃO CONTROLADA
The ID of the request for certification.
Displays the status of the firmware update.
Sets the IP address of the RCG (Remote
*CTL Communication Gate) destination for call
processing at the remote service center.
CÓPIA NÃO CONTROLADA
Main SP Tables-5
5
485