Ricoh M022 Service Manual page 404

5. System Maintenance
[Skew Origin Set]
2220
Resets the value of the skew adjustment motor for each color.
These SPs must be executed when a new laser optics housing unit is installed.
001 C:Skew Motor
002 M:Skew Motor
003 Y:Skew Motor
[Temperature/Humidity: Display]
2241
Displays the environment temperature and humidity.
001 Temperature
5
002 Relative Humidity
003 Absolute Humidity
[Common: BW: Bias]
2351 Image Transfer Belt: B/W: Bias Adjustment
Standard: 260 mm/sec, Middle: 182 mm/sec, Low: 85 mm/sec
Image Transfer:Standard Speed
001
Adjusts the current for the image transfer belt in B/W mode for plain paper.
Image Transfer:Middle Speed
002
Adjusts the current for the image transfer belt in B/W mode for M-Thick paper.
Image Transfer:Low Speed
003
Adjusts the current for the image transfer belt in B/W mode for thick 1 paper.
[Plain1: Bias]
2401
Adjusts the DC voltage of the discharge plate for plain 1 paper.
Standard: 260 mm/sec, Low: 85 mm/sec
402
CÓPIA NÃO CONTROLADA
*ENG
*ENG
*ENG
- [–1280 to 1270 / 0 / 0.1 deg/step]
- [0 to 1000 / 0 / 0.1 %RH/step]
- [0 to 100 / 0 / 0.01 g/m
CÓPIA NÃO CONTROLADA
-
3
/step]
*ENG [0 to 80 / 26 / 1 A]
*ENG [0 to 80 / 17 / 1 A]
*ENG [0 to 80 / 7 / 1 A]