Ricoh M022 Service Manual page 1044

3. Appendix: SP Mode Tables
[SDK Application Counter]
5893
Displays the counter name of each SDK application.
001 SDK-1
002 SDK-2
003 SDK-3
004 SDK-4
3
005 SDK-5
006 SDK-6
5894 [External Counter Setting] DFU
001 Switch Charge Mode
5907 [Plug & Play Maker/Model Name]
Selects the brand name and the production name for Windows Plug & Play. This information
is stored in the NVRAM. If the NVRAM is defective, these names should be registered again.
001
After selecting, press the "Original Type" key and "#" key at the same time. When the setting
is completed, the beeper sounds five times.
5913 [Switchover Permission Time]
Print Application Timer
002
Sets the amount of time to elapse while the machine is in standby mode (and the operation
panel keys have not been used) before another application can gain control of the display.
5967 [Copy Server Set Function]
Enables and disables the document server. This is a security measure that prevents image
data from being left in the temporary area of the HDD. After changing this setting, you must
switch the main switch off and on to enable the new setting.
[Cherry Server]
5974
Specifies which version of ScanRouter, "Lite" or "Full", is installed.
298
CÓPIA NÃO CONTROLADA
*CTL -
*CTL -
*CTL -
*CTL -
*CTL -
*CTL -
*ENG [0 to 2 / 0 / 1/step]
*CTL
*CTL
CÓPIA NÃO CONTROLADA
[3 to 30 / 3 / 1 second /step]
0: ON, 1: OFF