Ricoh M022 Service Manual page 389

Feed Condition
001
Selects the paper feed timing.
0: Productivity priority, 1: Fusing quality priory
Note:
When the print paper size changes from a small to a large size, you can stop the print job
in order to ensure that the fusing temperature is high enough, and then resume it when the
proper temperature has been reached.
This mode is used on machines in which the fusing ability is low, for example when there is
one fusing lamp. And it is mainly used on A3 MFPs which change repeatedly between A3
and A4 size. However, it is not used on machines in which there are two heating lamps, such
as A4 MFPs which almost never change between A4 and A5.
1121 [Maximum Duty Switch]
Control Method Switch
001
Selects the power control method for the fusing unit.
0: Fixed control, 1: Power control
1159 [Fusing Jam Detection]
SC Display
001
Enables or disables the fusing consecutive jam (three times) SC detection.
0: No detection, 1: Detection
1902 [Gain Control]
001 Execute
002 Result
CÓPIA NÃO CONTROLADA
*ENG [0 or 2 / 0 / 1]
*ENG [0 or 1 / 1 / 1]
*ENG [0 or 1 / 0 / 1]
*ENG
*ENG
CÓPIA NÃO CONTROLADA
Execute drum phase adjustment.
[0 to 3 / 0/ 1]
Displays the result of drum phase
adjustment.
0: Successfully done
2: Sampling failure
3: Insufficient detection number
Main SP Tables-1
5
387