Ricoh M022 Service Manual page 893

016 PaperTransfer:Low:2nd:S4
[SP1: L-Edge Correct] DFU
Special 1 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
mode. SP2753 and SP2757 are multiplied by these SP values.
2771
Standard: 260 mm/sec, Low: 85 mm/sec
• The paper leading edge area can be adjusted with SP2772.
001 Paper Transfer: Standard: 1st
002 Paper Transfer: Standard: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
005 Separation DC: Standard: 1st
006 Separation DC: Standard: 2nd
007 Separation DC: Low: 1st
008 Separation DC: Low: 2nd
[SP 1:Switch Timing:L-Edge] DFU
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
2772
paper leading edge between the erase margin area and the image area.
Standard: 260 mm/sec, Low: 85 mm/sec
CÓPIA NÃO CONTROLADA
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
CÓPIA NÃO CONTROLADA
[1 to 100 / 41 / 1 /step]
139 mm > S4 (Paper width)
[0 to 995 / 100 / 5%/step]
System SP2-xxx
3
147