Ricoh M022 Service Manual page 853

[Thin: T-Edge Correct] DFU
Thin Paper: Trailing Edge Correction
Adjusts the correction coefficient to the paper transfer roller current for the paper trailing
edge in each mode. SP2453 and SP2457 are multiplied by these SP values.
2473
Standard: 260 mm/sec, Low: 85 mm/sec
• The paper trailing edge area can be adjusted with SP2474.
001 Paper Transfer: Standard: 1st
003 Paper Transfer: Low: 1st
005 Separation DC: Standard: 1st
007 Separation DC: Low: 1st
[Thin: Switch Timing: T-Edge] DFU
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge plate at the
2474
paper trailing edge between the erase margin area and the image area.
Standard: 260 mm/sec, Low: 85 mm/sec
001 Paper Transfer: Standard: 1st
003 Paper Transfer: Low: 1st
005 Separation DC: Standard: 1st
007 Separation DC: Low: 1st
[Thin: Environment Correction] DFU
2480
Standard: 260 mm/sec, Low: 85 mm/sec
013 Separation DC: Standard: 1st
015 Separation DC: Low: 1st
[Thin: Edge Env. Correct]
017 Separation DC: Standard: 1st
019 Separation DC: Low: 1st
CÓPIA NÃO CONTROLADA
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
CÓPIA NÃO CONTROLADA
[0 to 995 / 100 / 5%/step]
[0 to 50 / 0 / 2 mm/step]
*ENG
[1 to 100 / 30 / 1 /step]
*ENG
*ENG
[1 to 100 / 30 / 1 /step]
*ENG
System SP2-xxx
3
107