Ricoh M022 Service Manual page 482

5. System Maintenance
017 CCS
018 SRM Memory Clr
019 LCS
020 Web Uapli
021 ECS
5803 [Input Check]
5804 [Output Check]
5
[Anti-Condensation Heater]
0: Default setting. The heater is on when the main switch is off or when the machine is in
5805
energy saver mode.
1: The heater is always on.
001 0:OFF/ 1:ON
[SC Reset]
Resets a type A service call condition.
5810
• Turn the main switch off and on after resetting the SC code.
001 Fusing SC Reset
5811 [Machine Serial] Machine Serial Number Display
002 Display
004 BCU
5812 [Service Tel. No. Setting]
480
CÓPIA NÃO CONTROLADA
Initializes the CCS (Certification and Charge-control
Service) settings.
Initializes the SRM (System Resource Manager) settings.
Initializes the LCS settings.
Initializes the web user application settings.
Initializes the ECS settings.
See "Input Check Table" in this section.
See "Output Check Table" in this section.
*ENG
- -
*ENG Displays the machine serial number.
*ENG Inputs the serial number.
CÓPIA NÃO CONTROLADA
[0 or 1/ 0 / -]