Ricoh M022 Service Manual page 867

015 Paper Transfer: 1: S4
016 Paper Transfer: 2: S4
[Thick 2: L-Edge Correct] DFU
Thick 2 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
2571
mode. SP2553 and SP2558 are multiplied by these SP values.
• The paper leading edge area can be adjusted with SP2572.
001 Paper Transfer: 1st
002 Paper Transfer: 2nd
003 Separation DC: 1st
004 Separation DC: 2nd
[Thick 2: Switch Timing: L-Edge] DFU
2572
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
001 Paper Transfer: 1st
002 Paper Transfer: 2nd
003 Separation DC: 1st
004 Separation DC: 2nd
[Thick 2: T-Edge Correction] DFU
Thick 2 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
2573
mode. SP2553 and SP2558 are multiplied by these SP values.
• The paper trailing edge area can be adjusted with SP2574.
CÓPIA NÃO CONTROLADA
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
CÓPIA NÃO CONTROLADA
[1 to 100 / 13 / 1 /step]
139 mm > S4 (Paper width)
[1 to 100 / 38 / 1 /step]
139 mm > S4 (Paper width)
[0 to 995 / 100 / 5%/step]
[0 to 50 / 0 / 2mm/step]
System SP2-xxx
3
121