Ricoh M022 Service Manual page 141

Shadow (High ID)
ID max
Offset
There are four adjustable modes (can be adjusted with SP4-918-009):
• Copy Photo mode
• Copy Letter mode
• Copy Letter (Single Color) mode
• Copy Photo (Single Color) mode
- Adjustment Procedure -
1. Copy the C-4 chart in the mode that you want to adjust.
2. Enter the SP mode.
3. Select "System SP."
4. Select SP4-918-009.
5. Adjust the offset values until the copy quality conforms to the standard (see the table below).
• 1. Never change "Option" value (default value is "0").
• 2. Adjust the density in this order: "ID Max", "Middle", "Shadow", "Highlight".
- Photo Mode, Full Color -
CÓPIA NÃO CONTROLADA
Levels 6 through 9 in the C4 chart 10-level scale
Level 10 in the C4 chart 10-level scale (affects the entire image density.)
The higher the number in the range associated with the low ID, middle ID,
high ID, and ID max, the greater the density.
CÓPIA NÃO CONTROLADA
Image Adjustment
4
139