Ricoh M022 Service Manual page 355

3. Release the six connectors and disconnect all the harnesses.
4. BCU [A] ( x 7)
• Make sure the EEPROM is correctly installed on the BCU. Insert the EEPROM in the EEPROM
slot with the "half-moon" pointing [B] to the downward side.
When installing the new BCU
1. Remove the EEPROM from the old BCU.
2. Install the EEPROM on the new BCU after you replace the BCU.
3. Reassemble the machine.
4. Turn on the main power of the machine.
5. "SC995-01" occurs.
6. Enter the serial number with SP5811-004.
7. Turn the main power of the machine off and on.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA
Electrical Components
4
353