Ricoh M022 Service Manual page 991

CÓPIA NÃO CONTROLADA
Default Document ACL
Whenever a new login user is added to the address book in external certification mode
(for Windows, LDAP, RDH), the default document ACL is updated according to this SP
setting.
[0 to 3 / 0 / 1]
103
0: View
1: Edit
2: Edit/Delete
3: Full control
Note: This SP setting is ignored on a machine that is not using document server.
Authentication Time
104
Specifies the time for the authentication timeout.
0 = 60 seconds, 1 to 255 = displayed time (seconds)
162 Extend Certification Detail
200 SDK1 Unique ID
201 SDK1 Certification Method
210 SDK2 Unique ID
211 SDK2 Certification Method
220 SDK3 Unique ID
221 SDK3 Certification Method
SDK certification device
• Bit 0: SDK authentication
0: Off (Default), 1: On (SDK authentication enabled)
230
Selects the SDK authentication setting.
• Bit 2: Administrator log in setting
0: Off (Default), 1: On
CÓPIA NÃO CONTROLADA
*CTL -
*CTL [0 to 255 / 0 / 1 second]
Selects the log out type for the extend
authentication device.
Bit 0: Log-out without an IC card
*CTL
0: Not allowed (default)
1: Allowed
*CTL
*CTL
"SDK" is the "Software Development Kit". This
*CTL
data can be converted from SAS (VAS) when
*CTL
installed or uninstalled.
*CTL
*CTL
*CTL -
System SP5-xxx
3
245