Ricoh M022 Service Manual page 904

3. Appendix: SP Mode Tables
[SP 2: T-Edge Correct] DFU
Special 2 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
mode. SP2803 and SP2807 are multiplied by these SP values.
2823
Middle: 182 mm/sec, Low: 85 mm/sec
• The paper trailing edge area can be adjusted with SP2824.
3
001 Paper Transfer: Middle: 1st
002 Paper Transfer: Middle: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
005 Separation DC: Middle: 1st
006 Separation DC: Middle: 2nd
007 Separation DC: Low: 1st
008 Separation DC: Low: 2nd
[SP 2: Switch Timing: T-Edge] DFU
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge plate at the
2824
paper trailing edge between the erase margin area and the image area.
Middle: 182 mm/sec, Low: 85 mm/sec
001 Paper Transfer: Middle: 1st
002 Paper Transfer: Middle: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
005 Separation DC: Middle: 1st
006 Separation DC: Middle: 2nd
007 Separation DC: Low: 1st
008 Separation DC: Low: 2nd
158
CÓPIA NÃO CONTROLADA
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
CÓPIA NÃO CONTROLADA
[0 to 995 / 100 / 5%/step]
[0 to 50 / 0 / 2 mm/step]