Ricoh M022 Service Manual page 505

[Stamp Data Download]
Use this SP to download the fixed stamp data stored in the firmware of the ROM and copy
it to the HDD. This SP can be executed as many times as required. This SP must be executed
5853
after replacing or formatting the hard disks.
• This SP can be executed only with the hard disks installed.
[Remote ROM Update]
5856
Allows the technician to upgrade the firmware using a local port (IEEE1284) when
updating the remote ROM.
002 Local Port
5857 [Save Debug Log]
On/Off (1:ON 0:OFF)
001
Switches the debug log feature on and off. The debug log cannot be captured until this
feature is switched on.
Target (2: HDD 3: SD)
Selects the storage device to save debug logs information when the conditions set with
002
SP5-858 are satisfied.
[ 2 to 3 / 2 / 1 /step]
Save to HDD
Saves the debug log of the input SC number in memory to the HDD.
005
A unique file name is generated to avoid overwriting existing file names on the SD Card.
Up to 4MB can be copied to an SD Card. 4 MB segments can be copied one by one to
each SD Card.
Save to SD Card
006
Saves the debug log of the input SC number in memory to the SD card.
009 Copy HDD to SD Card (Latest 4 MB)
010 Copy HDD to SD Card (Latest 4 MB Any Key)
CÓPIA NÃO CONTROLADA
*CTL
*CTL
0: OFF, 1: ON
2: HDD, 3: SD Card
CÓPIA NÃO CONTROLADA
[0 to 1 / 0 / 1/step]
0: Disable
1: Enable
-
Main SP Tables-5
5
503