Ricoh M022 Service Manual page 1014

3. Appendix: SP Mode Tables
Regist: Status
Displays a number that indicates the status of the @Remote service device.
0: Neither the registered device by the external nor embedded RCG device is set.
1: The embedded RCG device is being set. Only Box registration is completed. In this status,
this unit cannot answer a polling request from the external RCG.
201
2. The embedded RCG device is set. In this status, the external RCG unit cannot answer a
polling request.
3
3. The registered device by the external RCG is being set. In this status the embedded RCG
device cannot be set.
4 The registered module by the external RCG has not started.
202 Letter Number
203 Confirm Execute
Confirm Result
Displays a number that indicates the result of the inquiry executed with SP5816 203.
0: Succeeded
1: Inquiry number error
2: Registration in progress
3: Proxy error (proxy enabled)
204
4: Proxy error (proxy disabled)
5: Proxy error (Illegal user name or password)
6: Communication error
7: Certification update error
8: Other error
9: Inquiry executing
Confirm Place
205
Displays the result of the notification sent to the device from the GW URL in answer to the
inquiry request. Displayed only when the result is registered at the GW URL.
206 Register Execute
268
CÓPIA NÃO CONTROLADA
Allows entry of the number of the request needed for the
embedded RCG.
Executes the inquiry request to the @Remote GW URL.
Executes "Embedded RCG Registration".
CÓPIA NÃO CONTROLADA