Ricoh M022 Service Manual page 485

CÓPIA NÃO CONTROLADA
Install Status
This SP displays the Embedded RC Gate installation status.
022
0: RCG device not registered
1: RCG device registered
2: Device registered
Connect Mode (N/M)
This SP displays and selects the Embedded RC Gate connection method.
023
[0 or 1 / 0 / 1 /step
0: Internet connection
1: Dial-up connection
061 -
Use Proxy
062
This SP setting determines if the proxy server is used when the machine communicates with
the service center.
Proxy Host
This SP sets the address of the proxy server used for communication between Embedded
RC Gate-N and the gateway. Use this SP to set up or display the customer proxy server
address. The address is necessary to set up Embedded RC Gate-N.
063
• The address display is limited to 128 characters. Characters beyond the 128
character are ignored.
• This address is customer information and is not printed in the SMC report.
Proxy Port Number
This SP sets the port number of the proxy server used for communication between Embedded
RC Gate-N and the gateway. This setting is necessary to set up Embedded RC Gate-N.
064
• This port number is customer information and is not printed in the SMC report.
CÓPIA NÃO CONTROLADA
Main SP Tables-5
5
483