Ricoh M022 Service Manual page 912

3. Appendix: SP Mode Tables
[FC: ACS] DFU
Adjusts the threshold for moving away the image transfer belt from the color PCUs. This SP
moves the image transfer belt away from the color PCUs when the number of B/W image
2907
printouts reaches the number of sheets specified with this SP after consecutive full color image
printouts in the full color mode.
If this SP is set to "0", the image transfer belt does not move away.
001 Bk Image Count
3
2911 [Offset Phase] DFU
001 Y Drum
002 M Drum
003 C Drum
004 K Drum
2912 [Offset Gain] DFU
001 Y Drum
002 M Drum
003 C Drum
004 K Drum
2915 [GainAdj:BkOpcDevM] DFU
002 260 mm/sec
003 182 mm/sec
005 85 mm/sec
2916 [GainAdj:ColorOpcM] DFU
166
CÓPIA NÃO CONTROLADA
*ENG [0 to 10 / 0 / 1 sheet/step]
*ENG
*ENG
[0 to 359 / 0 / 1 deg/step]
*ENG
*ENG
*ENG
*ENG
[0 to 100 / 0 / 0.1 m/step]
*ENG
*ENG
[0 or 1 / 0 / 1/step]
*ENG 0: High speed
1: Low speed
*ENG [0 or 1 / 1 / 1/step]
0: High speed
*ENG
1: Low speed
CÓPIA NÃO CONTROLADA