Ricoh M022 Service Manual page 923

Consumption Pattern: LD: DUTY: Y
Adjusts the LD duty for the toner consumption mode at the toner density adjustment.
021
In toner consumption mode, toner is discharged when the detected development gamma
values (SP3611-004) exceed the target values (SP3611-008) by more than the specified
thresholds (SP3239-009).
[Toner Supply Type] Toner Supply Type ([Color])
3044
Selects the toner supply method type.
001 Bk
002 C
003 M
004 Y
[Toner End Detection: Set] DFU
3045
Enables/disables the toner alert display on the LCD.
001 ON/OFF
[Toner End/Near End] DFU
3101
Displays the amount of each color toner.
001 Toner Replenishment: Bk
002 Toner Replenishment: C
003 Toner Replenishment: M
004 Toner Replenishment: Y
005-008 Displays the consumed amount of each color toner.
CÓPIA NÃO CONTROLADA
*ENG
*ENG [0 to 4 / 4 / 1/step] Alphanumeric
0: FIXED (with the supply rates stored with SP 3401)
*ENG
1: PID (Vtref_Fixed)
*ENG
2: PID (Vtref_Control)
3: MBD (Vtref_Fixed)
*ENG
4: MBD (Vtref_Control)
[0 or 1 / 0 / 1/step]
*ENG
0: Detect, 1: Not Detect
*ENG
*ENG
*ENG
*ENG
CÓPIA NÃO CONTROLADA
[0 to 15 / 15 / 1 /step]
[1 to 600 / 240 / 1 g/step]
System SP3-xxx
3
177