Ricoh M022 Service Manual page 986

3. Appendix: SP Mode Tables
This program specifies when the counter goes up. The settings refer to "paper feed" and "paper
001
exit" respectively.
5127 [APS Mode]
001 This program disables the APS.
[Code Mode With Key/Card
5128
3
Option]
001 This program disables the code mode with key/card option.
5131 [Paper Size Type Selection]
1.NA 2.EU ASIA
001
Selects the paper size type (for originals and paper).
After changing the value, turn the main power switch off and on.
5150 [Bypass Length Setting]
Determines whether the transfer sheet from the by-pass tray is used or not.
001
Normally the paper length for sub scanning paper from the by-pass tray is limited to 600
mm, but this can be extended with this SP to 1260 mm.
5162 [App. Switch Method]
001 This program specifies the switch that selects an application program.
[Fax Printing Mode at Optional]
5167
Enables or disables the automatic print out without an accounting device. This SP is used
when the receiving fax is accounted by an external accounting device.
Fax Printing Mode at Optional
001
Counter Off
240
CÓPIA NÃO CONTROLADA
*CTL [0: Not disabled/ 1: Disabled]
*CTL [0: Not disabled/ 1: Disabled]
[0 to 2 / 1: NA, 2: EU / 1]
*EN
G
0: Japan, 1: NA, 2: EU
*CTL [0: OFF/ 1: ON]
*CTL [0: Soft Key Set/ 1: Hard Key Set]
[0 or 1 / 0 / - ]
*CTL 0: Automatic printing
1: No automatic printing
CÓPIA NÃO CONTROLADA