Ricoh M022 Service Manual page 953

[Toner End Prohibition Setting]
3519
Enables or disables each adjustment at toner end.
001 Process Control
002 MUSIC
003 TC Adjustment
3520 [ITB Idle Time] DFU
001 Temperature: H
002 Temperature: M
003 Temperature: L
004 Temp.: L: ON
005 to
Adjusts the threshold temperature for entering the ITB idle rotation after the process control.
006
005 Temp. Thresh:T2
006 Temp. Thresh:T1
[Initial Process Control Setting]
Adjusts the threshold for the process control at power on.
3522
When the current condition has changed by more than the values of these SPs when
compared with the conditions at the previous operation, the process control at power on is
executed.
002 Non-use Time Setting
003 Temp. Range
004 Relative Humidity Change
005 Absolute Humidity Change
CÓPIA NÃO CONTROLADA
*ENG [0 or 1 / 1 / 1/step]
0: Permit (adjustment is done even toner end
*ENG
condition)
1: Forbid (adjustment is not done at toner end
*ENG
condition)
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
CÓPIA NÃO CONTROLADA
Specifies the idle rotation times of the ITB
after the process control.
[0 or 3 / 1.9 / 1 revolution/step]
[20 or 30 / 25 / 1 deg/step]
[0 or 15 / 15 / 1 deg/step]
[0 to 1440 / 360 / 1 minute/step]
[0 to 99 / 10 / 1 deg/step]
[0 to 99 / 50 / 1 %RH/step]
3
[0 to 99 / 6 / 1 g/m /step]
System SP3-xxx
3
207