Ricoh M022 Service Manual page 766

3. Appendix: SP Mode Tables
017 Duplex:Plain
018 Duplex:M-Thick
019 Duplex:Thick1
020 Duplex: Thick2
021 Duplex:Plain:1200dpi
022 Duplex:MThck:1200dpi
3
023 Duplex:Thck1:1200dpi
024 Tray:Thin
026 By-pass:Thin
[Side-to-Side Registration]
Adjusts the side-to-side registration by changing the laser main scan start position for each
1002
mode and tray.
Increasing a value: an image is moved to the rear edge of paper.
Decreasing a value: an image is moved to the front edge of paper.
001 By-pass
002 Paper Tray 1
003 Paper Tray 2
004 Paper Tray 3
005 Paper Tray 4
006 Duplex
[Paper Buckle] Paper Buckle Adjustment
(Tray Location, Paper Type), Paper Type: N: Normal, TH: Thick
1003
Adjusts the amount of paper buckle at the registration roller by changing the paper feed
timing.
001 Tray1:Plain
002 Tray1:M-Thick
20
CÓPIA NÃO CONTROLADA
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
CÓPIA NÃO CONTROLADA
[–9 to 9 / 3.9 / 0.1 mm/step]
[–9 to 9 / -0.1 / 0.1 mm/step]
[–9 to 9 / -2.1 / 0.1 mm/step]
[–9 to 9 / -3 / 0.1 mm/step]
[–9 to 9 / 0.7 / 0.1 mm/step]
[–9 to 9 / 0.1 / 0.1 mm/step]
[–9 to 9 / 0 / 0.1 mm/step]
[–9 to 9 / 1 / 0.1 mm/step]
[–9 to 9 / 1 / 0.1 mm/step]
[–4 to 4 / 0.0 / 0.1 mm/step]
[-11 to 9 / -1 / 1 mm/step]
[-11 to 9 / -1 / 1 mm/step]