Ricoh M022 Service Manual page 871

[OHP: L-Edge Correct] DFU
OHP: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
2621
mode. SP2603 and SP2608 are multiplied by these SP values.
• The paper leading edge area can be adjusted with SP2622.
001 Paper Transfer
002 Separation DC
[OHP: Switch Timing: L-Edge] DFU
2622
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
001 Paper Transfer
002 Separation DC
[OHP: T-Edge Correct] DFU
OHP: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
2623
mode. SP2603 and SP2608 are multiplied by these SP values.
• The paper trailing edge area can be adjusted with SP2624.
001 Paper Transfer
002 Separation DC
[OHP: Switch Timing T-Edge] DFU
2624
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge plate at the
paper trailing edge between the erase margin area and the image area.
001 Paper Transfer
002 Separation DC
CÓPIA NÃO CONTROLADA
*ENG
[0 to 995 / 100 / 5%/step]
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
[0 to 995 / 100 / 5%/step]
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
CÓPIA NÃO CONTROLADA
System SP2-xxx
3
125