Ricoh M022 Service Manual page 375

1103 [Fusing Idling] Fusing Idling Adjustment
012 Forced Idling Stop
013 Forced Idling Stop Temp.
014 Minimum Idling Time
Specifies how long the extra idling operation is executed for each environment.
016 to
018
Each environment is determined with SP1112-001 and 002.
016 Extra Idling Time (L)
017 Extra Idling Time (H)
018 Extra Idling Time (M)
019 Ex Idling Temp:P-Roll
020 Control Switch Temp
1104 [Fusing Idling Before Job]
001 Environment Thresh
Idling Temp:P-Roll
002
Specifies the threshold temperature for the pressure roller idling before a job.
003 Idling Time: BW
004 Idling Time: FC
005 Idling Time: M-Thick: BW
006 Idling Time: M-Thick: FC
007-009 Specifies the thereshold temperature of the paper feed before a job.
007 Paper Feed Temp:P-Roller
008 P.Feed Temp:MThick:P-Roll:BW
CÓPIA NÃO CONTROLADA
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
CÓPIA NÃO CONTROLADA
[0 to 1 / 0 / 1 /step]
0: OFF, 1; ON
[100 to 180 / 100 / 1 deg/step]
[0 to 10 / 2 / 1 sec/step]
[0 to 60 / 20 / 1 sec/step]
[0 to 60 / 0 / 1 sec/step]
[0 to 60 / 0 / 1 sec/step]
[0 to 160 / 110 / 1 deg/step]
[0 to 100 / 16 / 1 deg/step]
[0 to 2 / 2 / 1 /step]
0: Low Temp,
1: Low/Normal
2: All Env
[0 to 160 / 160 / 1 deg /step]
Specifies the fusing idling time for
each printe mode before a job.
[0 to 10 / 2 / 1 sec/step]
[0 to 160 / 90/ 1 deg/step]
[0 to 160 / 100/ 1 deg/step]
Main SP Tables-1
5
373