Ricoh M022 Service Manual page 952

3. Appendix: SP Mode Tables
029 TnCnsmp: Internal Thresh
030 TnCnsmp: Counter:Bk
031 TnCnsmp: Counter:FC
032 TnCnsmp: Internal Thresh 2
[Blade Damage Prevention]
3
Adjusts the threshold temperature for preventing the cleaning blade in the transfer belt
3517
cleaning unit from being damaged. If the temperature is above this value, toner is applied
to the transfer belt at set intervals during the job to prevent the blade from flipping over.
001 Execution Temp. Thresh
3518 [Image Adj. Execution Flag] DFU
001 Toner End Recovery: Bk
002 Toner End Recovery: C
003 Toner End Recovery: M
004 Toner End Recovery: Y
005 Vsg Adjustment
006 Developer Mixing
007 Process Control
008 MUSIC
009 Drum Phase Adj.
010 Charge AC Control
011 Blade Damage Prevention
012 Vsg Average Error
206
CÓPIA NÃO CONTROLADA
*ENG
*ENG
*ENG
*ENG
[0 or 1 / 0 / 1/step]
0: OFF. 1: ON
*ENG
*ENG
*ENG
*ENG
[0 to 2 / 0 / 1/step]
0: OFF. 1: ON (once), 2: ON (twice)
*ENG
*ENG
[0 or 1 / 0 / 1/step]
*ENG
0: OFF. 1: ON
*ENG
[0 or 1 / 0 / 1/step]
Sets "1", when the following values shows.
*ENG Vsg_reg_ave:
3.5 Vsg_reg_ave 4.5 or Vsg_dif_ave:
0.0 Vsg_dif_ave 0.5
CÓPIA NÃO CONTROLADA
*ENG
*ENG [0 to 1000 / 0 / 1 page/step]
*ENG
*ENG [0 to 255 / 4 / 1 page/step]
[0 to 50 / 0 / 1 deg/step]