Ricoh M022 Service Manual page 558

5. System Maintenance
8 231
8 231 1 Large Volume
8 231 2 SADF
8 231 3 Mixed Size
8 231 4 Custom Size
8 231 5 Platen
5
8 231 6 Mixed 1side/ 2side
• If the scan mode is changed during the job, for example, if the user switches from ADF to Platen mode,
the count is done for the last selected mode.
• The user cannot select mixed sizes or non-standard sizes with the fax application so if the original's
page sizes are mixed or non-standard, these are not counted.
• If the user selects "Mixed Sizes" for copying in the platen mode, the Mixed Size count is enabled.
• In the SADF mode if the user copies 1 page in platen mode and then copies 2 pages with SADF, the
Platen count is 1 and the SADF count is 3.
8 241
8 242
8 243
8 245
556
CÓPIA NÃO CONTROLADA
Scan PGS/Mode
These SPs count the number of pages scanned by each ADF mode to determine the
work load on the ADF.
T:Scan PGS/Org
These SPs count the total number of scanned pages by original type for all jobs,
regardless of which application was used.
C:Scan PGS/Org
These SPs count the number of pages scanned by original type for Copy jobs.
F:Scan PGS/Org
These SPs count the number of pages scanned by original type for Fax jobs.
S:Scan PGS/Org
These SPs count the number of pages scanned by original type for Scan jobs.
CÓPIA NÃO CONTROLADA
*CTL [0 to 9999999/ 0 / 1]
Selectable. Large copy jobs that cannot be loaded in the
ADF at one time.
Selectable. Feeding pages one by one through the ADF.
Selectable. Select "Mixed Sizes" on the operation panel.
Selectable. Originals of non-standard size.
Book mode. Raising the ADF and placing the original
directly on the platen.
Simplex and Duplex mode.
*CTL [0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]