Ricoh M022 Service Manual page 380

5. System Maintenance
Target Temp. After Ready
082
Specifies the target temperature for the maintain mode after the machine has reached the
target temperature in warm-up mode.
Recovery Target Temp.
083
Specifies the target temperature for the print mode without printing job after the machine's
recovery.
087 Thick 2: FC: Simplex: Ends
088 Thick 2: BW: Simplex: Ends
089 Thick 3: FC: Simplex: Center
090 Thick 3: FC: Simplex: Ends
5
091 Thick 3: BW: Simplex: Center
092 Thick 3: BW: Simplex: Ends
109 M-Thick:FC:Simplex:Center
110 M-Thick:FC:Duplex:Center
111 M-Thick: BW: Simplex:Center
112 M-Thick: BW: Duplex:Center
113 M-Thick: FC: Simplex: Ends
114 M-Thick: FC: Duplex: Ends
115 M-Thick: BW: Simplex: Ends
116 M-Thick: BW: Duplex: Ends
378
CÓPIA NÃO CONTROLADA
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
CÓPIA NÃO CONTROLADA
[100 to 180 / 160 / 1 deg/step]
[100 to 180 / 160 / 1 deg /step]
[100 to 180 / 140 / 1 deg/step]
[100 to 180 / 160 / 1 deg/step]
[100 to 180 / 175 / 1 deg/step]