Ricoh M022 Service Manual page 398

5. System Maintenance
001 Maximum 2: Bk
002 Maximum 2: C
003 Maximum 2: M
004 Maximum 2: Y
005 Maximum 2: Front
006 Maximum 2: Center
007 Maximum 2: Rear
[ID Sensor Check Result]
5
Displays the minimum result 2 values of the ID sensor check.
2145
Front, Center, Rear: ID sensors for the automatic line position adjustment and the process
control
001 Minimum 2: Bk
002 Minimum 2: C
003 Minimum 2: M
004 Minimum 2: Y
005 Minimum 2: Front
006 Minimum 2: Center
007 Minimum 2: Rear
[Area Mag. Correction] LD Pulse Area Correction (Color, Area) FA
Adjusts the magnification for each area. The main scan (297 mm) is divided into 13 areas.
Area 1 is at the front side of the machine (left side of the image) and area 13 is at the rear
side of the machine (right side of the image).
2150
Decreasing a value makes the image shift to the left side on the print.
Increasing a value makes the image shift to the right side on the print.
1 pulse = 1/16 dot
027 Area 0: Bk: LD1
028 Area 1: Bk: LD1
396
CÓPIA NÃO CONTROLADA
*ENG
*ENG
*ENG
*ENG [0 to 5.5 / 0 / 0.01V/step]
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG [0 to 5.5 / 0 / 0.01V/step]
*ENG
*ENG
*ENG
*ENG [-255 to 255 / 0 / 1sub-dot/step]
*ENG [-255 to 255 / -233 / 1sub-dot/step]
CÓPIA NÃO CONTROLADA