Ricoh M022 Service Manual page 770

3. Appendix: SP Mode Tables
Panel Off Mode: P-Roller
015
Specifies the presure roller temperature in the panel off mode.
016 Low Power: Center
017 Low Power: Ends
Low Power: P-Roller
018
3
Specifies the pressure roller temperature in the low power mode.
019 Off Mode: Center
020 Off Mode: Ends
Off Mode:P-Roller
021
Specifies the pressure roller temperature in the sleep mode.
030 to The target fusing temperature for each paper type and mode can be adjusted by the following
239 SPs.
030 Plain:FC:Simplex:Center
031 Plain: FC: Simplex: Ends
032 Plain:FC:Duplex:Center
033 Plain: FC: Duplex: Ends
034 Plain: BW: Simplex:Center
035 Plain: BW: Simplex: Ends
036 Plain: BW: Duplex:Center
037 Plain: BW: Duplex: Ends
24
CÓPIA NÃO CONTROLADA
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
CÓPIA NÃO CONTROLADA
[50 to 160 / 120 / 1 deg /step]
Specifies the heating roller temperature
(center or ends) in the low power mode.
[30 to 180 / 40 / 1 deg /step]
[30 to 160 / 110 / 1 deg /step]
Specifies the heating roller temperature
(center or ends) in the sleep mode.
[0 to 180 / 0 / 1 deg /step]
[0 to 170 / 0 / 1 deg /step]
[100 to 180 / 155 / 1 deg /step]