Ricoh M022 Service Manual page 777

233 F: MThick:Duplex: Press
234 Glossy: Plain1: Duplex: Press
235 Glossy: Plain2: Duplex: Press
236 Glossy: MThick: Duplex: Press
237 F: Thick1:Duplex: Press
238 F: SP 1:Duplex: Press
239 F: SP 2:Duplex: Press
[Fusing Temperature Display] Fusing Temperature Display (Heating or Pressure)
1106
Displays the current temperature of the heating and pressure rollers.
001 Fusing Roller: Center
002 Fusing Roller: Ends
The heating roller has two lamps. One heats the center of the heating roller and the other
heats both ends of the heating roller.
003 Pressure Roller: Center
The pressure roller has two lamps. One heats the center of the heating roller and the other
heats both ends of the heating roller.
[Ready Temp Setting]
1108
Japan use only
007 Ready Temp Time
1109 [Fusing Nip Band Check]
001 Execute
CÓPIA NÃO CONTROLADA
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
- [–20 to 250 / 0 / 1 deg/step]
- [–10 to 250 / 0 / 1 deg/step]
- [–10 to 250 / 0 / 1 deg/step]
*ENG [22 to 60 / 43 / 0.1 sec/step]
[0 or 1 / 0 / 1]
Executes the nip band measurement between
fusing belt and pressure roller.
-
If the nip band width is not 8 mm, and fusing is
not good, replace the pressure roller or install a
new fusing unit.
CÓPIA NÃO CONTROLADA
[50 to 160 / 90 / 1 deg/step]
System SP-xxx
3
31