Ricoh M022 Service Manual page 979

4806 [Carriage Move]
001 -
4807 [SBU Test Pattern Change]
001 -
4808 [Factory Setting Input] DFU
002 Execution Flag
4810 [PWM] DFU
4811 [LED White Level Peak Read] DFU
4812 [LED White Level Peak Read] DFU
[ACC Data Display]
This SP outputs the final data read at the end of ACC execution.
4902
A zero is returned if there was an error reading the data.
[0 to 255 / 0 / 1 /step]
001 R DATA1
002 G DATA1
003 B DATA1
004 R DATA2
CÓPIA NÃO CONTROLADA
Moves the carriage from the scanner home
position.
-
Dust may fall through the DF exposure glass.
Therefore, do this SP when you transport the
machine a long distance.
[0 to 250 / 0 / 1 /step]
1: Grid pattern
- 2: Gradation main scan
3: Gradation sub scan
4 to 250: Default (Scanning Image)
- [0 or 1 / 0 / 1 /step]
*ENG Photo C Patch Level 1 (8-bit)
*ENG Photo M Patch Level 1 (8-bit)
*ENG Photo Y Patch Level 1 (8-bit)
*ENG Photo C Patch Level 17 (8-bit)
CÓPIA NÃO CONTROLADA
System SP4-xxx
3
233