Ricoh M022 Service Manual page 395

003 Mode c
004 Mode d
[Skew Adjustment]
2117
Specifies a skew adjustment value for the skew motor M, C or Y.
001 Pulse: C
002 Pulse: M
003 Pulse: Y
2118 [Skew Adjustment]
001 Execute: C
002 Execute: M
003 Execute: Y
[Skew Adjustment Display]
2119
Displays the current skew adjustment value for each skew motor.
001 C
002 M
003 Y
[ID Sensor Check Result]
Displays the maximum result values of the ID sensor check.
2140
Front, Center, Rear: ID sensors for the automatic line position adjustment and the process
control
CÓPIA NÃO CONTROLADA
Executes the rough line position adjustment once.
After doing this SP, make sure to execute
-
SP2111-001 or -002. Otherwise, the line position
adjustment is not perfectly done.
- Rough adjustment and fine adjustment, once each.
*ENG
*ENG [–100 to 100 / 0 / 1 pulse/step]
*ENG
*ENG
Changes the current skew adjustment values to the
*ENG
values specified with SP2117.
*ENG
*ENG
*ENG [–75 to 75 / 0 / 1 pulse/step]
*ENG
CÓPIA NÃO CONTROLADA
Main SP Tables-2
5
393