Ricoh M022 Service Manual page 144

4. Replacement and Adjustment
4 Highlight (Low ID) (K)
• Text parts of the test pattern cannot be printed clearly after you adjust "shadow" as shown above. At
this time, check if the 5 line/mm pattern at each corner is printed clearly. If it is not, adjust the offset
value of "shadow" again until it is.
4
Printer Mode
There are six adjustable modes (select these modes with printer SP1-102-001):
• 1200 x 1200 photo mode
• 1200 x 1200 text mode
• 2400 x 600 photo mode
• 2400 x 600 text mode
• 1800 x 600 photo mode
• 1800 x 600 text mode
• 600 x 600 photo mode
• 600 x 600 text mode
Highlight
Shadow
Middle
IDmax
- Adjustment Procedure -
1. Do ACC for the printer mode.
2. Turn the main power off and on.
3. Enter SP mode.
4. Select "Printer SP".
5. Select SP1-102-001. Then select the necessary print mode to adjust.
142
CÓPIA NÃO CONTROLADA
K
SP1-104-1 SP1-104-21
SP1-104-2 SP1-104-22
SP1-104-3 SP1-104-23
SP1-104-4 SP1-104-24
CÓPIA NÃO CONTROLADA
Adjust the offset value so that dirty
background does not show on
the copy and the density of level
3 is slightly lighter than that of
level 3 on the C-4 chart.
C M
SP1-104-41
SP1-104-42
SP1-104-43
SP1-104-44
Y
SP1-104-61
SP1-104-62
SP1-104-63
SP1-104-64