Ricoh M022 Service Manual page 919

[Toner Replenishment Mode]
3022
Sets the toner supply flag of each color.
005 Execution Flag: Bk
006 Execution Flag: C
007 Execution Flag: M
008 Execution Flag: Y
3041 [Process Control Type]
Voltage Control
001
Enables or disables the process control.
LD Power Control
002
Selects the LD power control mode.
Auto Control Prohibition
Set
003
-
Pre-ACC Process Control
004
Selects the process control mode that is done before ACC.
CÓPIA NÃO CONTROLADA
*ENG
[0 or 1 / 0 / 1/step]
*ENG
0: Flag OFF, 1: Flag ON
This flag is cleared after executing TD sensor
*ENG
initialization.
*ENG
[0 or 1 / 1 / 1/step ] Alphanumeric
0: FIXED (Use the fixed values for the charge DC bias
*ENG and development DC bias set with SP2-005 and
SP2-229.)
1: CONTROL
[0 or 1 / 1 / 1/step] Alphanumeric
*ENG 0: FIXED (at the value in SP2221-xxx)
1: CONTROL (adjusted by process control)
[0 or 1 / 0 / 1/step]
*ENG
0: Permit, 1: Forbid
[0 to 2 / 2 / 1/step]
0: Not Execute
*ENG
1: Process Control
2: TC Control
CÓPIA NÃO CONTROLADA
System SP3-xxx
3
173